JNTUK B.Tech R16 Regulation Academic Regulations PDF Download

JNTUK B.Tech R16 Regulation Academic Regulations PDF Download

Jntu kakinada B.Tech R16 academic regulations, JNTUK R16 Regulation b.tech academic regulations pdf download, academic regulations for Lateral Entry Scheme.

JNTUK B.Tech R16 Regulation Academic Regulations PDF DownloadJNTUK B.Tech R16 Regulation Academic Regulations PDF Download

Academic Regulations R16 for B.Tech. (Regular)

Applicable for the students of B. Tech. (Regular) from the Academic Year 2016-17 onwards.

1. Award of B.Tech. Degree A student will be declared eligible for the award of the B. Tech. Degree if he fulfills the following academic regulations.

(a)       A student will be declared eligible for the award of the B. Tech. Degree if he Pursued a course of study for not less than four academic years and not more than eight academic years.

(b)       The candidate shall register for 180 credits and secure all the 180 credits.

2. Courses of study The following courses of study are offered at present as specializations for the B. Tech. Courses with English as medium of Instruction.

S. No Branch
01 Civil Engineering
02 Electrical and Electronics Engineering
03 Mechanical Engineering
04 Electronics and Communication Engineering
05 Computer Science and Engineering
06 Information Technology
07 Petro Chemical Engineering
08 Chemical Engineering
09 Electronics and Instrumentation Engineering
10 Aeronautical Engineering
11 Automobile Engineering
12 Bio Technology
13 Electronics and Computer Engineering
14 Mining Engineering
15 Petroleum Engineering
16 Metallurgical Engineering
17 Agricultural Engineering

And any other course as approved by the authorities of the University from time to time.

3.Distribution and Weightage of Marks

(i)  The performance of a student in each semester shall be evaluated subject – wise with a maximum of 100 marks for theory and 75 marks for practical subject. The project work shall be evaluated for 200 marks.

(ii) For theory subjects the distribution shall be 30 marks for Internal Evaluation And 70 mark for the End – Examinations.

(iii.) For theory subjects, during the semester there shall be 2 tests. The weightage of Internal marks for 30 consists of Descriptive – 15, Assignment – 05 (Theory, Design, Analysis, Simulation, Algorithms, Drawing, etc. as the case may be and for Physics, Virtual Labs to be considered as Assignments) Objective -10 (Conducted at College level with 20 Multiple choice question with a weightage of ½ Mark each). The objective examination is for 20 minutes duration. The subjective examination is for 90 minutes duration conducted for 15 marks. Each subjective type test question paper shall contain 3 questions and all questions need to be answered. The Objective examination conducted for 10 marks and subjective examination conducted for 15 marks are to be added to the assignment marks of 5 for finalizing internal marks for 30.

Internal Marks can be calculated with 80% weightage for best of the two Mids and 20% weightage for other Mid Exam As the syllabus is framed for 6 units, the 1st mid examination (both Objective and Subjective) is conducted in 1-3 units and second test in 4-6 units of each subject in a semester.

(iv) The end semester examination is conducted covering the topics of all Units for 70 marks. End Exam Paper: Part-A 1st Question is mandatory covering all the syllabus which contains seven 2 marks questions for 14 marks with atleast 2 marks of question for each of the six units and in Part-B 4 Questions out of 6 Questions are to be answered with each carrying 14 marks. Part-A & Part-B put together gives for 70 marks.

(v) For practical subjects there shall be continuous evaluation during the semester for 25 internal marks and 50 end examination marks. The internal 25 marks shall be awarded as follows: day to day work – 10 marks, Record-5 marks and the remaining 10 marks to be awarded by conducting an internal laboratory test. The end examination shall be conducted by the teacher concerned and external examiner.

(vi) For the subject having design and / or drawing, (such as Engineering Graphics, Engineering Drawing, Machine Drawing) and estimation, the distribution shall be 30 marks for internal evaluation ( 20 marks for day – to – day work, and 10 marks for internal tests) and 70 marks for end examination. There shall be two internal tests in a Semester and the Marks for 10 can be calculated with 80% weightage for best of the two tests and 20% weightage for other test and these are to be added to the marks obtained in day to day work.

(vii.) For the seminar, Each student has to be evaluated based on the presentation of any latest topic with report of 10-15 pages and a ppt of min 10 slides. The student shall collect the information on a specialized topic and prepare a technical report, showing his understanding over the topic, and submit to the department, which shall be evaluated by the Departmental committee consisting of Head of the department, seminar supervisor and a senior faculty member. The seminar report shall be evaluated for 50 marks. There shall be no external examination for seminar.

(viii) Out of a total of 200 marks for the project work, 60 marks shall be for Internal Evaluation and 140 marks for the End Semester Examination. The End Semester Examination (Viva – Voce) shall be conducted by the committee. The committee consists of an external examiner, Head of the Department and Supervisor of the Project. The evaluation of project work shall be conducted at the end of the IV year. The Internal Evaluation shall be on the basis of two seminars given by each student on the topic of his project and evaluated by an internal committee.

(ix) Laboratory marks and the internal marks awarded by the College are not final. The marks are subject to scrutiny and scaling by the University wherever felt desirable. The internal and laboratory marks awarded by the College will be referred to a Committee. The Committee shall arrive at a scaling factor and the marks will be scaled as per the scaling factor. The recommendations of the Committee are final and binding. The laboratory records and internal test papers shall be preserved in the respective departments as per the University norms and shall be produced to the Committees of the University as and when they ask for.

4. Attendance Requirements :

(i.)       A student shall be eligible to appear for University examinations if he acquires a minimum of 75% of attendance in aggregate of all the subjects.

(ii)      Condonation of shortage of attendance in aggregate up to 10% (65% and above and below 75%) in each semester for genuine reasons and shall be approved by a committee duly appointed by the college. The condonation approved or otherwise can be reviewed by the University.

(iii) Shortage of Attendance below 65% in aggregate shall not be condoned.

(iv)  A student who is short of attendance in semester may seek re-admission into that semester when offered within 4 weeks from the date of the commencement of class work.

(v) Students whose shortage of attendance is not condoned in any semester are not eligible to write their end semester examination of that class.

(vi) A stipulated fee shall be payable towards condonation of shortage of attendance.

(vii) A student will be promoted to the next semester if he satisfies the

(i)attendance requirement of the present semester and

(ii) minimum required credits.

(viii) If any candidate fulfills the attendance requirement in the present semester, he shall not be eligible for readmission into the same class.

5. Minimum Academic Requirements

The  following  academic  requirements  have  to  be  satisfied  in  addition  to  the attendance requirements mentioned in item no.4.

5.1 A student is deemed to have satisfied the minimum academic requirements if he has earned the credits allotted to each theory/practical design/drawing subject/project by securing not less than 35% of marks in the end semester exam, and minimum 40% of marks in the sum total of the internal marks and end semester examination marks.

5.2 A student shall be promoted from first year to second year if he fulfills the minimum attendance requirement.

5.3  A student will be promoted from II year to III year if he fulfills the academic requirement of 40% of the credits up to either II year I semester or II year II semester from all the examinations, whether or not the candidate takes the examinations and secures prescribed minimum attendance in II year II semester.

5.4  A student shall be promoted from III year to IV year if he fulfils the academic requirements of 40% of the credits up to either III year I semester or III year II semester from all the examinations, whether or not the candidate takes the examinations and secures prescribed minimum attendance in III year II semester.

5.5  A student shall register and put up minimum attendance in all 180 credits and earn all 180 credits.

6.  Course Pattern

6.1 The entire course of study is for four academic years, all the years are on semester pattern.

6.2. A student eligible to appear for the end semester examination in a subject, but absent from it or has failed in the end semester examination, may write the exam in that subject when conducted next.

6.3 When a student is detained for lack of credits / shortage of attendance, he may be re-admitted into the same semester / year in which he has been detained. However, the academic regulations under which he was first admitted shall continues to be applicable to him.

7. CGPA

Marks Range Theory (Max – 100) Marks Range

Lab(Max – 75)

Letter

Grade

Level Grade Point
≥ 90 ≥ 67 O Outstanding 10
≥80 to <90 ≥60 to <67 S Excellent 9
≥70 to <80 ≥52 to <60 A Very Good 8
≥60 to <70 ≥45 to <52 B Good 7
≥50 to <60 ≥37 to <45 C Fair 6
≥40 to <50 ≥30 to <37 D Satisfactory 5
<40 <30 F Fail 0
Absent 0

Computation of SGPA

The  following  procedure  is  to  be  adopted  to  compute  the  Semester  Grade  Point

Averagae. (SGPA) and Cumulative Grade Point Average (CGPA):

The SGPA is the ratio of sum of the product of the number of credits with the grade points scored by a student in all the courses taken by a student and the sum of the number of credits of all the courses undergone by a student, i.e

SGPA (Si) =   (Ci X Gi) / Ci

Where Ci is the number of credits of the ith course and Gi is the grade point scored by the student in the ith course.

Computation of CGPA

  • The CGPA is also calculated in the same manner taking into account all the courses undergone by a student over all the semester of a programme, i.e.

CGPA =  (Ci X Si) / Ci

Where Si is the SGPA of the ith semester and Ci is the total number of credits in that semester.

  • The SGPA and CGPA shall be rounded off to 2 decimal points and reported in the transcripts.
  • Equivalent Percentage = (CGPA – 0.75) x 10

 

8. Award of Class After a student has satisfied the requirements prescribed for the completion of the program and is eligible for the award of B. Tech. Degree, he shall be placed in one of the following four classes:

Class Awarded CGPA to be secured From the CGPA secured from

180 Credits.

First Class with Distinction ≥ 7.75 with no subject failures
First Class ≥ 6.75 with subject failures
Second Class ≥ 5.75 to < 6.75
Pass Class ≥ 4.75 to < 5.75

 9.Minimum Instruction Days

The minimum instruction days for each semester shall be 90 working days.

10. There shall be no branch transfers after the completion of the admission process.

11. There shall be no transfer from one college/stream to another within the Constituent Colleges and Units of Jawaharlal Nehru Technological University Kakinada.

12. Withholding of Results

If the student has not paid the dues, if any, to the university or if any case  of indiscipline is pending against him, the result of the student will be withheld. His degree will be withheld in such cases.

13. Transitory Regulations

i.  Discontinued or detained candidates are eligible for readmission as and when next offered.

ii.  The readmitted students will be governed by the regulations under which the candidate has been admitted.

iii.  (a) In case of transferred students from other Universities, the credits shall be            transferred to JNTUK as per the academic regulations and course structure of the JNTUK.

(b) The students seeking transfer to colleges affiliated to JNTUK from various other Universities / Institutions have to obtain the credits of any equivalent subjects as prescribed by JNTUK. In addition, the transferred candidates have to pass the failed subjects at the earlier instiute with already obtained sessional marks to be conducted by JNTUK.

14.  General

i.     Wherever the words “he”, “him”, “his”, occur in the regulations, they include “she”, “her”, “hers”.

ii.     The academic regulation should be read as a whole for the purpose of any interpretation.

iii.     In case of any doubt or ambiguity in the interpretation of the above rules, the decision of the Vice-Chancellor is final.

iv.     The University may change or amend the academic regulations or syllabi at any time and the changes or amendments made shall be applicable to all the students with effect from the dates notified by the University.

Academic Regulations R16 for B. Tech. (Lateral Entry Scheme)

Applicable for the students admitted into II year B. Tech. from the Academic Year 2017-18 onwards

Download the Complete R16 Regulation academic regulations PDF HereClick Here